Create a Slim Pandora Battery

Sony's PSP-2000 and PSP-3000 consoles tend to be referred to as the PSP Slim. They are available preinstalled with official Sony firmware. The phrase "homebrew" identifies any user-created programs, utilities and hacks which allow the PSP to function in ways unintended by Sony. Make use of homebrew applications with your console, you need to use a modified PSP 2000 Case, or Pandora battery, to "trick" the console into installing custom firmware.

Instructions

1. Pry apart both the sides on the PSP 2000 Housing Case with all the razor blade.

2. Get rid of the top 50 % of the casing and set it aside. You should never damage the three metal connectors at the top of battery; they may be unprotected with the casing removed.

3. Turn over the green circuit card around the right side on the battery. It can be coupled to the battery casing at the end with hinges.

4. Locate the larger black contribute center of the board and look for an inferior black chip directly below it. The right chip will probably be labeled either "C04" or "IC04." The all over the place sides in the chip each have four small silver pins connecting it for the plug-in.

5. Locate the end-right pin and realize that there is a silver path connecting the "IC04" chip to the larger black chip. PSP 2000 Repair Parts Stick to the path and soon you reach the number "19" printed within the circuit card. Cut carefully with the silver connecting line here using the razor blade.

6. Flip the plug-in back to the case and replace the superior half it case. Secure both the halves together with black electrical tape. jklzaeqc 1102

7. Place the Pandora battery in your PSP and power about the console. In the event the screen remains black and also the green power light happens, battery is functioning correctly.