Fix a DSI When the Screen Is White

The Nintendo dsi charger is definitely an upgrade towards the original Ds lite released in 2004 by Nintendo. As well as dual screens and also a bottom touch monitor, the Nintendo DSi also features two cameras that include additional capabilities for gamers. Unfortunately, only a few Nintendo DSi units are afflicted by a white screen effect that affects the underside DSi screen and renders it useless. Normally you'll need to replace the screen, but you can manage this action although you may lack any experience repairing Nintendo DSi units.

Instructions

1. Cut your Nintendo DSi and power it back on. Look at the bottom screen for just about any continued whiteness. If your screen is still white and stays unusable, you will need to put it back entirely.

2. Remove the game cart on the surface of your device, if applicable. Get rid of the stylus through the top right stylus slot on the Nintendo DSi. Shut the display and turn it over.

3. Take away the battery, which is upon the back left on the tool and can be accessed by setting up battery compartment. Ensure the DSi was already powered completely off before the process.

4. Get the screws within the back with the Nintendo dsi battery. You will discover seven screws here and each can be taken off that has a Phillips screwdriver.

5. Lose the rear cover. The coverage will probably be loose and you could simply pry along its edges to tug it off and reveal the DSi's motherboard.

6. Locate the three cables over the base with the Nintendo DSi's motherboard. All of the cables connects into a black connector. Stop gently and incredibly slightly on each connector. Don't pullup on each many millimeters, or they might break. While using connectors pulled upright, slide each cable seem to disconnect it.

7. Get rid of the power wires within the device. These power wires are clustered near the bottom center of the motherboard where they may be locked in place by one white connector. Pull-up gently about this connector to drag the power wires in a similar you applied to additional three connectors about the motherboard.

8. Take away several screws within the motherboard making use of your Phillips screwdriver. There is certainly one lone screw inside top right corner in the motherboard. The opposite three are clustered around the left side of the motherboard.

9. Go ahead and take motherboard from the housing, in addition to make an effort to eliminate it completely as it is still connected by two cables. Those two cables is usually left as is also. Lay the motherboard on the medial side from the DSi Power Cords so you can access the screen beneath it.

10. Grab underneath screen. It is loose and can simply be pulled free. jklzaeqc 1102

11. Position the revolutionary replacement bottom DSi screen in the housing from the gaming system. It'll slide in exactly where you removed the previous screen.

12. Reassemble the Nintendo DSi by performing every one of the disassembly measures in reverse. First turn on the DSi Power Adapters.