Xbox 360 controller

December 19 2012 , Written by wells Published on #xbox 360 controller, #buy xbox 360 controller, #cheap xbox 360 controller

One of the features that comes with purchasing a Microsoft XBox 360 is lots of the hardware attachments applied to the console also get treatment on a Windows-based PC. Including the wired xbox 360 controller frequently used within the XBox. With the provided hardware that included your Xbox 360 system purchase you could have the many necessary software and hardware to perform the call.

 

 

Instructions

 

1. Insert the installation CD in to the disk drive of your respective computer. This installation CD included your Xbox 360 elite. Inside a moment the installation wizard loads onto the screen.

 

2. Click "Install" when the prompt appears and also the installation CD uploads the necessary files to your Windows computer.

 

3. Plug the USB data cable running out of your wired buy xbox 360 controller into one of many USB ports on your hard drive.

 

4. Click on the "Start" button, then either choose "Run" or press "Windows" and "R" as well. Type in "joy.cpl" and press "OK". Pick the Xbox 360 system controller from your joystick list, then click "Properties". From your properties window, click on the trigger button around the wired controller. If the computer detects the unit you might be all set to commence deploying it on many PC-based video gaming.

 

Tips on how to Fix an Xbox 360 elite Controller While using the Four Lights Blinking

 

The Xbox 360 system could be the second gaming console that is generated by Microsoft and it is more complex compared to original Xbox. The Xbox 360 permits you to connect nearly four wireless controllers on your gaming console. If you see four blinking lights on the wireless controller, it indicates there exists a connection problem regarding the controller as well as the console. Fixing the challenge involves disconnecting then re-connecting your wireless controller for your system.

 

Instructions

 

1. Hold down the "Guide" button for the wireless controller for three seconds, then turn the controller off. In case you have multiple controllers coupled to the Xbox 360 elite, you will need to disconnect all of them to be able to resolve the challenge with all the one controller that's blinking.

 

2. First turn on the Xbox. Press and hold down the "Guide" button within the cheap xbox 360 controller which in fact had the blinking lights.

 

3. Press the "Connect" button for the front on the Xbox. This button is underneath the "Power" button on the console.

 

4. Press the "Connect" button around the back of the controller ( http://www.vdealbox.com/xbox-360-accessories/xbox-360-controller.html ). This should be done within 20 seconds of pressing the "Connect" button on the Xbox 360 elite. If to much time elapses, just repeat previous step.

 

5. Wait a while until the lights about the power button about the console stop flashing. Whenever they stop flashing, both the products are now connected.